
For Models: 460, 560, 660, 706, 806, 1206, 1256, 544, 666, 686, Hydro 70
A-370689R21 Knee, w/bushings. DIM. A=3.875"
For Models: 766, 966, 1066, 1466, 1468, 786, 886, 1086, 1486, 1586, (Hydro 100, 186, 3488), 15663088, 3288,(5088, 5288, 5488w/round center casting)
A-531260R92 Knee, w/bushings DIM. A=4.375"
For Models: Fits all 1.667 in.IH spindles with 1.375 threaded shaft
A-427546 Jam nut, spindle
For Models: (06, 56, 66, 86, 88 series tractors)(454 thru 885 utility tractors)(815, 915, 1420, 1440, 1460, 1620 combines w/71785C92 spindles)
Bushing, spindle/knee
For Models: Any IH tractor or combine w/1.667
Thrust Bearing
For Models: 966 thru 1566, 786 thru 1586, Hydro 100, 186, 5088, 5288, 5488, 3088, 3288, 3488, 3688
Bushing, axle pivot
For Models: M, MD, Super M, M-TA, Farmall 400, 450
Rear Saddle
For Models: 460, 560, 660, 706, 806, 1206, 656, 756, 826, 856, 1026, 1256, 544, 666 686, Hydro 70
A-383909R4 Bolster casting
For Models: 460, 560, 660, 706, 806, 1206, 656, 756, 826, 856, 1026, 1256, 544, 666 686, Hydro 70
A-379941R1 Pin, bolster pivot
1.232" dia X 8.500" Long
For Models: 766, 966, 1066, 1466, 1468, 1566, 1568, 786 thru 1586, Hydro 100, 186
A-531263R1 Boster casting
For Models: 766, 966, 1066, 1466, 1468, 1566, 1568, 786 thru 1586, Hydro 100, 186
A-531240R1 Pin, bolster pivot
2.000" dia. X 6.937" long
For Models: 460, 560, 660, 706, 806, 1206, 656, 756, 826, 856, 1026, 1256, 544, 666, 686, Hydro 70
Center tube assy.
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, Hydro 100, 186, 3488, 5088 thru 3688
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, Hydro 100, 186, 3488, 5088 thru 3688
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, Hydro 100, 186, 3488, 5088 thru 3688
If you need the washer too the part number is 95-81019 {$.88}
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, Hydro 100, 186, 3488, 5088 thru 3688
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, Hydro 100, 186, 3488, 5088 thru 3688
For Models: 560, 544, 656, 706, 756, 806, 856, 826, 1026, 1206, 1256, 1456, 666, Hydro 70
Shim # 60762D Lock # 358345R93
For Models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586,
Shim # 379954R1 Lock # 380008R1
For Models: 766, 966, 1066, 1466, 1468, 1566, 1568
For Models: all 66 series using block type cyliner end
Note: to use this part, you must ream center casting hole with a tapered reamer.
A-223314 Pin w/ nuts, steering clyinder
- Book Store
- Fenders
Replacement Fenders and Parts:
SHIPPING ON LARGER PARTS WILL BE ACTUAL COST FROM NEAREST WAREHOUSE.
The shopping cart will add shipping on smaller parts.
- Misc